Banner Q4X series laser ranging photoelectric sensor Q4xTBLAF300-Q8 photoelectric switch sensor
Product description
Rugged, multi-functional laser ranging sensors are capable of detecting submillimeter range changes with exceptional performance.
- Switching quantity, analog quantity (0-10V or 4-20 mA), transparent object detection, available in 10-Link model
- Q4X600 high-resolution models can now provide analog output and higher excess gain to solve more application problems
- Reliable detection range up to 25 mm and as far as 610 mm
- Detects a variety of target colors, materials, and surfaces based on distance
- Dual teaching mode (intensity + distance) is ideal for error prevention applications, enabling transparent object detection without reflector plates
- Rugged FDA-grade stainless steel case with IP69K protection rating
- Easy Settings with response buttons
- Rugged design, resistant to mechanical shock, overtightness and extreme vibration
- The tilting four-digit display provides clear range reading
specification
| Brand name | Banner |
| Model name | Q4XTBLAF300-Q8 |
| Device Type | Sensor |
| Primary Housing Material | Stainless Steel |
| Max Sensing Distance (mm) | 300 |
| Minimum Sensing Distance (mm) | 25 |
| Power Supply | 10-30 V dc |
| Discrete (Switched) Outputs | Bipolar (NPN & PNP) |
| Output Protection | Protected against continuous overload and short circuit |
| IP Rating | IP67; IP68; IP69 |
| Storage Temperature (°C) | -25 to 75 |
| Supply Protection Circuitry | Protected against reverse polarity and transient overvoltages |
Features
Display and Indicators The display is a 4-digit, 7-segment LED. The main screen is the Run mode screen. For 2-pt, BGS, FGS, and DYN TEACH modes, the display shows the current distance to the target in millimeters. For dual TEACH mode, the display shows the percentage matched to the taught reference surface. A display value of indicates the sensor has not been taught.
Output Indicator
• On—Outputs conducting (closed)
• Off—Outputs not conducting (open)
Stability Indicator (STB)
• On—Stable signal within the specified sensing range
• Flashing—Marginal signal, the target is outside the limits of the specified sensing range, or a multiple peak condition exists
• Off—No target detected within the specified sensing range
Output Indicator
• On—Outputs conducting (closed)
• Off—Outputs not conducting (open) Stability Indicator (STB)
• On—Stable signal within the specified sensing range
• Flashing—Marginal signal, the target is outside the limits of the specified sensing range, or a multiple peak condition exists
• Off—No target detected within the specified sensing range
Buttons
(SELECT)(TEACH)
• Press to select menu items in Setup mode
• Press and hold for longer than 2 seconds to start the currently selected TEACH mode (the default is twopoint TEACH)
(-)(MODE)
• Press to navigate the sensor menu in Setup mode
• Press to change setting values; press and hold to decrease numeric values
• Press and hold for longer than 2 seconds to enter Setup mode
(+)(DISP)
• Press to navigate the sensor menu in Setup mode
• Press to change setting values; press and hold to increase numeric values
• Press and hold for longer than 2 seconds to switch
ote: When navigating the menu, the menu items loop.
